Amazing Sound!
Colors explode across coral reefs what inspired our designers and engineers to create the CORAL speaker series.
Like reefs our speakers explode with thousands of tones, and take you for an enjoyable and luxurious journey to the land of audiophile music.
The beautifully crafted enclosures in luxurious wood veneer or elegant high gloss finishes, groundbreaking technology and advanced developments.
The second generation TPTTD-I (Taga Pure Titanium Tweeter Dome) and TPAF (Taga Pure Aluminum Faceplate) same as used in our flagship Platinum SE series bring high frequencies up to the totally new high-end level of performance with super precise, detailed, clear and spacious sound.
The new high-end 6.5” TPACD (Taga Pure Aluminum Cone Driver) used in floorstanding model reproduces very natural, clean, coloration-free and rich sound of vocals and instruments.
Top high-end quality bass is delivered thanks to the new TRSCD (Taga Reinforced Straw Cone Driver) woofer and mid-woofer. Bass is extremely deep and accurate keeping great timing at the same time.
The Coral series elegant simplicity and quality bring you closer to the sound of the original recording – we have used our passion and love for music making you happier while listening!
Design |
Center, 2-way, 3 drivers TLIE enclosure Crossover points: 3kHz |
Power handling |
20 - 140W (recommended amplifier power) 105W RMS |
Frequency response | 44Hz - 40kHz |
Bassreflex | Rear double |
Impedance | 6ohm |
Sensitivity | 88dB |
High-frequency driver | 25 mm (1”), TPTTD-I, TPAF |
Bass-Midrange driver | 2 x 133 mm (5.25"), TRSCD |
Dimensions (H x W x D) | 16.5 x 50 x 21 cm |
Weight | 7.2 kg / pc. |
Real wood veneer colours
![Walnut veneer with clear matt lacquer](/files/35/walnut1530001650.jpg)
Paint colours
![High gloss black](/files/35/highGlossBlack.jpg)
![High gloss white](/files/35/highGlossWhite.jpg)
CORAL Series
CABINETS
TLIE –Taga Low Interference Enclosures are made of high-quality, high-density MDF boards (18mm in CORAL F-120, 15mm in CORAL F-80 and 12mm in Center & Surround speakers) with inside braces (floorstanding models) to increase stiffness and limit any unwanted resonances.
The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.
Acoustical damping material used inside cabinets eliminates problem of internal standing waves and bass-reflex ports are uniquely designed to reduce distortions to minimum.
Floorstanding models sit on massive bases with spikes that provide stability and good isolation of speakers from the floor.
REINFORCED PAINTING
HIGH GLOSS – Minimum 7 layers of paint (reinforced) plus 1 layer of the base coat.
WOOD VENEERS - Minimum 3 layers of paint (reinforced) plus 1 layer of the base coat.
HIGH-FREQUENCY DRIVER
4. TPTTD Pure-titanium dome
5. Metal grill
6. TPAF Pure Aluminum Faceplate
8. Copper-Clad Aluminum Wire (CCAW) voice coil with silver wiring
16. Black sponge
17. Aluminum heatsink
18. Neodymium magnet
Revised second generation TPTTD-I (Taga Pure Titanium Tweeter Dome) uses neodymium magnet for a higher efficiency and more precise and extended high-frequency response. Ferrofluid cooling and heavy duty CCAW and silver wiring voice coil help the tweeter to bear high power and its performance is very accurate, clear, smooth and detailed.
TPAF (Taga Pure Aluminum Faceplate) helps further dispersion of high-frequencies.
MIDRANGE DRIVER
1. T-YOKE / Pole piece
2. Oversized ferrite magnet
3. Top plate
7. Aluminum injection-molded chassis with anti-oxidation surface process
8. Flat wire copper voice coil
9. Terminal
10. Spider
11. TPACD Pure aluminum cone and rubber surround
12. Pure aluminum dust cap
The totally new 6.5” TPACD Taga Pure Aluminum Cone Driver (with aluminum chassis and dust cap and oversized Φ90 magnet) with a butyl suspension can move very fast and frequently allowing mid-range frequencies to be very rich, spacious and sweet. Heavy duty combo T-yoke, pure copper voice coil can stand high temperatures and power inputs.
BASS-MIDRANGE DRIVER / BASS DRIVER
1. T-YOKE / Pole piece
2. Oversized ferrite magnet
3. Top plate
7. Aluminum injection-molded chassis with anti-oxidation surface process
8. Flat wire copper voice coil
9. Terminal
10. Spider
11. TRSCD Reinforced Straw Cone Driver
12. Straw knitting dust cap
15. Additional magnet
TRSCD Taga Reinforced Straw Cone Driver with the oversized magnet Φ100 magnet (F-120, F-80) and Φ90 (C-40/S-40) and heavy duty combo T-yoke, pure copper voice coil, allow for a high power handling as well as deep, precise and detailed bass performance (and detailed, rich and spacious midrange frequencies in mid-woofers models).
The structure of a cone.
BASSREFLEX
BOM Bassreflex Omnidirectional Module - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies. Ports are rubber coated for more luxurious look and to provide even better effect on a sound performance.
CROSSOVERS
High quality, close-tolerance and precisely selected crossovers’ components and internal wires for absolute sound neutrality, high long-term power and reliability.
INTERNAL WIRING
TAGA Harmony utilizes high quality of internal wiring connecting crossovers with drivers assuring that incoming audio signals from receiver or amplifier will not lose any important details on the paths to drivers.
BINDING POSTS
All speakers (including center and surround speakers) use high quality, gold-platted banana binding posts accepting raw speaker cables up to 10AWG and most popular types of connectors.
The front speakers use upgraded, high-end banana binding posts allowing bi-wiring for wider dispersions and spaciousness, higher sonic accuracy and more precise location.
![](/files/35/BEST-RECOMMENDED.jpg)